2.0 TFSI EA113 forged pistons & Steel connecting rod set MAHLE & BAR-TEK®

Conrods and pistons complete set for your 2.0L TFSI Our complete set for all 2.0L TFSI EA113 engines with timing belt is a dream team of high-strength steel conrods with X-Beam and high-performance forged pistons from MAHLE. While the original parts can no longer withstand the extreme stress of tuning, this set allows you to easily bringup to 650 hpto road. The parts are perfectly matched to each other and definitely provide moredriving fun. In contrast to the single purchase, this set is evencheaper. Thanks to their design, our X-Beam connecting rods are prepared for the most extreme performance increases: Up to 1000 hp are in here! Due to the cross section of the connecting rods, the pressure load is evenly distributed on the connecting rod and thus reduced. That's why our connecting rods are extremelyrobust. Their crack resistance and stability not only improveperformance, but also ensure the correspondingsafetyof the engine: no more torn conrods! With MAHLE pistons, our connecting rods have found the optimum companion. They are specially alloyed and thus allow a low running clearance. The blowby is also reduced by special ring zones. The high-performance pistons provide the ideal compression ratio for TFSI engines. Just like our connecting rods, the pistons are alsovery lightdespite their enormousstability. The set also includes the high-quality ACL racing bearings and of course everything you need for assembly: connecting rod bolts from ARP and assembly paste. Features of the MAHLE pistons: Low running play possible thanks to special alloy Quiet engine operation even in cold start phase High performance piston pin Ideal compression ratio and optimum piston shape for TFSI engines For 2.0L TFSI with motor type EA113 For 144 x 20 mm connecting rods Low blowby due to special ring zones Anti-Friction Graphite Coating Mahle High Performance Piston Rings Plug & Play installation possible Features of the BAR-TEK® X-Beam connecting rod: Original BAR-TEK® high strength milled from solid material suitable for extreme performance increases up to approx. 1000 hp extremely light and very stable Magnaflux inspected 4 pieces per set With ARP 2000 expansion bolts 3/8" ARP Assembly paste Weight per connecting rod with screws only 599 grams With additional bore for piston pin lubrication Features of the ACL connecting rod bearings: Racing bearing Coated Extra bore for piston pin Suitable for: 2.0L TFSI EA113 engines with timing belts as installed in Golf 5, Golf 6 R, Audi TT, Audi S3, Seat Leon and other 2.0L TFSI engines. The indicated compression is in connection with a cylinder head gasket in series strength. More information on how to properlytighten the connecting rod bolts