BST10 - boost pressure sensor 6.5 Bar / 95 Psi CANchecked

Electronic boost pressure sensor up to 6.5 bar / 95 psi Suitable for numerous displays and gauges, MFD28, MFD32, Zada Tech, free injection systems. The CANchecked boost pressure sensor is compatible with all CANchecked displays and numerous other gauges and displays or freely programmable injection systems! Unlike other suppliers, this sensor can display boost pressures up to 6.5 bar / 95 psi! Features: Up to a maximum of 6.5 bar / 95 psi With connector and connection pins for crimping yourself Works with all displays / displays / freely programmable injection systems where the characteristic curve can be stored individually The following control units have already been tested: trijekt (Premium, Bee, trigifant) Megasquirt 2 and 3 k-data KDFI UMC1/UMC2 EFIgnition Microsquirt EcuMaster EMU (classic with Can-Bus adapter: EMU Black) AIM generic protocol LinkECU Haltech v2 MME ECU481 with Can Bus SCS Delta GDI4 and Delta VAG (Audi / VW / Seat) Van kronenburg KMS MD35 (MP25 with CAN bus adapter) VEMS with serial adapter Scope of delivery: - 6.5 bar boost pressure sensor - Connector plug - Pins for crimping cables Connection Assignment of the connector on the sensor to the MFD28 / MFD32: 5V -> A2 Ground -> A6 Signal -> A8 0-5V characteristic curve (relative): 0V=-1.31 BAR 5V=6.47 BAR